M&C TEC1 Series, Operation Manual

Page: 7 / 78

7
LIMITED WARRANTY
If the equipment fails, please contact M&C or your M&C authorized dealer. M&C equipment is provided with a
one year warranty as of the date of delivery as per normal terms and conditions of sale. The warranty excludes
damage caused by improper installation, operation or storage, and excludes the replacement of consumable
parts. The terms of the warranty cover repair or replacement at
M&C
’s
discretion of the item, at no cost,
including ground shipping to locations anywhere in North America. Warranty return shipments to M&C must be
properly packaged and handled for delivery to the M&C service facility. Damage due to improper storage and
transport is not covered under warranty terms. The M&C warranty specifically excludes claims of
consequential damages due to system downtime or damage to components beyond those supplied by M&C.
PRODUCT IDENTIFICATION
The TEC1 series has the following part number code designation:
TEC1abcXX_YY
TEC1 = series designation
a = number of active impingers, 1 or 2 (active controlled to 4
o
C)
b = impinger size
0 = 10” long impinger
c = total number of impingers, 1 or 2
XX = cooling configuration
A = Single active impinger
PA = Passive impinger followed by active impinger in series
AA = Dual Active. Either two single active impingers for two channel operation or active
impinger followed by active impinger in series for single channel operation
YY = impinger material designation (omit for a unit supplied without impingers)
GG = Duran glass
SS = 316 Stainless Steel
PV = Kynar
HH = Hastelloy C276