M&C TEC1 Series, Operation Manual

Page: 67 / 78

www.mc-techgroup.com MP- | 1.04.01 19
Figure 7 Electrical connection MP-F..
10.4 Pneumatic connection
It is possible to screw the tube connection fittings into the pump head either from the top or side.
To screw-in the tube connection fittings from the side, please remove protective plugs from the
gas connection threads on the side and screw them into the threads on the top.
Accessory parts like tube connection fittings are screwed into the connection threads with sealing
tape (when using straight M&C connectors, no sealing tape is necessary). Connection fittings for
DN 4/6 or DN 6/8 are optional and available at M&C.
The tube connection for M&C fittings is described below.
Figure 8 Pneumatic connection
PE
N L