M&C TEC1 Series, Operation Manual

Page: 18 / 78

18
o
Remove the adhesive tape and any surplus thermally conductive paste;
o
Reconnect the tubing for gas and drain connections.
o
Do not mix up the hose connections; gas outlet and gas inlet are marked with arrows.
•
Mounting the Duran glass heat exchangers please notice:
o
Check the PTFE/Silicon locking Rings for damage. In assembly, the locking rings must have the
PTFE side facing the medium, Otherwise the required degree of sealing cannot be guaranteed;
o
Tighten the red GL coupling rings hand-tight by turning them to the right.