M&C TEC1 Series, Operation Manual

Page: 34 / 78

10 SR25.X-X | 1.01.01 www.mc-techgroup.com
9 DESCRIPTION
The peristaltic pump SR25.X-X is self-suctioning and designed for continuous operation. It consists of 3
compact components:
synchronous motor,
gearing unit with return stop and
pump
head.
The slow speed of 1 to 5 rpm of the two PVDF hose contact pulleys together with the Novoprene tubing
guarantee a good mechanical and chemical resistance with a long service life. Pre-assembled flexible
tubing sets make it easy to replace tubing, even without using any tools. The tube connector DN 4/6
also allows connecting PTFE tubing. The peristaltic pump SR25.X-X can be equipped with a power
supply of 230 V/50 Hz or 115 V/60 Hz.
Danger
Type SR25.X has open electrical wiring!
Risk of death due to electric shock!
The unused wires must be safely insulated, preferably to a third free
terminal.
The following installation options are available:
Type SR25.X to integrate into a front plate
Type SR25.X-G with a wall mounting case
Type SR25.X-W with mounting bracket
Metric dimensions (mm) are rounded. Inch dimensions are for reference only. In case of doubt or conflict, metric units take priority.
Figure 1 Dimensions SR25.X
Note
Check the compatibility of the tube material with unknown gases before using the
peristaltic pump.