40
PMA1000/PMA1000L | 1.00.00
www.mc-techgroup.com
With tapping on the hidden password, you are opening the settings screens, where you
can change the current settings.
NOTICE
The measuring process is idle as long as a settings screen is open. In
this case alarm and status information are not current.
Immediately close any settings screens to prevent potentially danger-
ous situations, which will not be recognized by the analyzer during its
idle time.
Note
When a settings screen is open, the display stays on this settings
screen.
All other screens jump back to the start menu M2/S1, if the touch-
screen has not been used for 3 Minutes.
1 = Channel K1-Kn settings
The first screen of the M4/S2 Settings menu/parameter-section shows the channel selec-
tion ‘1 = Channel K1-Kn’. Please tap on the word ‘Online’. The next display shows a list of
the basic channel settings.
Fig. 39: M4/S2 Settings menu and parameter screen
Note
The display shows only part of the list. Scroll down the list by swiping
vertically or by pressing the arrow buttons to have a look at all
parameters.
Here you can change the name of your channel. To change the name, please tap on the
‘channel ID’ field. The whole field will be highlighted in orange and the name ‘channel ID’
will be displayed in the message box.
Tap on the message box to open the keypad.