5
PMA1000/PMA1000L | 1.00.00
www.mc-techgroup.com
Fig. 45: Buttons to get information and install hardware and software updates
46
Fig. 46: Screen to confirm the update of the application software
47
Fig. 47: M4/S2 screen with ‘Factory reset’ selected
47
Fig. 48: Default setting menu with four parameters to select
48
Fig. 49: Database import and export settings
48
Fig. 50: IP address input screen
49
Fig. 51: Date and time settings
49
Fig. 52: Supervisor settings for administrators
50
Fig. 53: Download a new PDF-file with the latest manual version
50
Fig. 54: Scroll bar with ‘B=Diagnosis’ displayed in the gray frame
51
Fig. 55: Schematic for diagnosis
51
Fig. 56: Display of the High-Side- and relay-outputs with the mA-output of I/O2
52
Fig. 57: Display of the highlighted SM2 components
52
Fig. 58: Scroll bar with ‘C=Service’ displayed in the gray frame
53
Fig. 59: Gas calibration screen
53
Fig. 60: Calibration of pressure gauges and flow sensor
54
Fig. 61: Help button screen
55
Fig. 62: Example: Span gas calibration with sample gas pump
57
Fig. 63: Example: Span gas calibration with calibration gas from a pressure cylinder
57
Fig. 64: Warm-up phase in M2/S1 and warm-up info on M2/S2
59
Fig. 65: Analyzer is ready to operate
59
Fig. 66: Manual calibration PMA1000L
60
Fig. 67: Setting the channel-specific calibration parameters
61
Fig. 68: Manual calibration with span gas
61
Fig. 69: First step of the manual calibration procedure
62
Fig. 70: Second step of the manual calibration procedure
62
Fig. 71: Third step of the manual calibration procedure
63
Fig. 72: End of the manual calibration procedure
63
Fig. 73: Data logger screen with green calibration symbol
64
Fig. 74: A terminated manual calibration procedure
64
Fig. 75: Manual calibration error
65
Fig. 76: Datalogger screen with red calibration symbol
65
Fig. 77: Screen showing details about a single calibration procedure
66
Fig. 78: AutoCal activation: open section M4/S2
67
Fig. 79: AutoCal activation: change system settings (first part of the list)
67
Fig. 80: AutoCal activation: change system settings (second part of the list)
68
Fig. 81: Scroll to ‘AutoCal’ to reach calibration start screen
69
Fig. 82: AutoCal start screen
69
Fig. 83: Parameter screen to adjust test gas measuring ranges and concentrations
70
Fig. 84: Tap on Start button to start AutoCal procedure
70
Fig. 85: Information displayed during AutoCal procedure
71
Fig. 86: Canceled AutoCal process
74
Fig. 87: Calibration of pressure gauges and flow sensor
75
Fig. 88: Formula to calculate the effects of coexisting gases
77
Fig. 89: Instruction manual available in PDF-format
81