manualshive.com logo in svg

M&C GENTWO PMA1000, Instruction Manual, Page: 14 / 90

Share
Download
M&C GENTWO PMA1000 Instruction Manual Download Page 14

13

PMA1000/PMA1000L   |  1.00.00 

 

www.mc-techgroup.com 

4.1  Receiving the analyzer

The PMA1000/PMA1000L is usually delivered in one package. You will find the following 
items in the box:

 

„

PMA1000/PMA1000L

 

„

Instruction Manual

 

„

EU version: power cord rated 230 VAC with an IEC 320 female connector and a 

CEE 7/7-plug. 

US version: power cord rated 115 VAC with an IEC 320 female connector and a 

standard 3 prong plug.

 

„

Digital/analog connectors (Phoenix printed circuit board connectors):

2 pieces: MSTB 2,5/ 8-ST-5,08 (8 positions, pitch: 5.08 mm)

2 pieces: MC 1,5/ 6-ST-3,5 (6 positions, pitch: 3.5 mm)

1 piece: MSTB 2,5/ 2-ST-5,08  (2 positions, pitch: 5.08 mm)

Note

Please note, that there are no materials or tools included in the 

package you might need for assembly or installation.

4.2  Product label and serial number

The product label with the serial number is located on the back of the PMA1000/PMA1000L.

Please refer to this serial number if you have any questions about your PMA1000/PMA1000L 
or if you need to order spare parts.

Thanks for your help!

1

Fig. 1:  Product label is on the back of the PMA1000/PMA1000L

1

 Product label

Summary of Contents for GENTWO PMA1000



























































































Reviews:

No comments