![Malmet ES915 Operation, Maintenance And Installation Manual Download Page 3](http://html2.mh-extra.com/html/malmet/es915/es915_operation-maintenance-and-installation-manual_3918624003.webp)
Malmet Bedpan / Urinal Bottle Washer Disinfector (ES-D)
Detergent Model with Hands Free Operation
Operation, Maintenance and Installation Manual
Issue 5
Page
2
June 23
Foreword
In order to obtain maximum life and efficiency from your Malmet Bedpan / Urinal Bottle Washer Disinfector and to aid in the safe
operation of the device, please read and understand this manual thoroughly and follow all instructions before operating.
This manual provides information on the operation of the device. It is recommended that all persons operating the device have
access to this manual for training purposes.
This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge.
Children should be supervised to ensure that they do not play with the device.
The specifications supplied in this manual were in effect at the time of publication. However, owing to Mal
met (Australia)’s policy
of continuous improvement, changes to these specifications may be made at any time without notice on the part of Malmet
(Australia).
Certifications and Compliances
ARTG Identifier: 232012
Electrical Safety:
Cert No. CS10847N to IEC 61010-2-040 in conjunction with IEC 61010-1
EMC Compliance:
Cert No. S180507-1
Watermark:
Cert No. WMKA21156
Quality Policy
Malmet’s quality management system is certified to ISO 13485:2016 and ISO 9001:2015 and guarantees the quality of th
is product.
Important Warranty Reminder
Should you have any problems with your device, contact the company from whom you purchased it, or Malmet (Australia) Pty Ltd.
It is important that the name from whom you purchased your device and the name of the installer are recorded on the front page
of this manual. The installer is responsible for the correct installation, start up and demonstrating the operation of this device.
They are also responsible for issuing relevant certificates of compliance (these may differ from state to state).
Malmet Head Office and Factory Contact Details
Malmet (Australia) Pty Ltd
9-11 McKay Avenue
PO Box 373
LEETON NSW 2705
Telephone: +61 2 6953 7677
E-mail:
Website: