manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

  Contact Information:

Malibu Boats 
5075 Kimberly Way
Loudon, TN 37774 
(865) 458-5478 

Malibu Boats, LLC Internet Site  

www.malibuboats.com    

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE

  Malibu Commercial Use Warranty

In the event your boat is used for commercial use, then the standard implied warranties
do not apply and Malibu Boats, LLC completely disclaims them to the extent allowed by
law. The Implied warranty of fitness for a particular purpose does not apply if your boat
is used for exhibition, even if the boat is equipped for that purpose.

Commercially used boat will have the following warranty:

Malibu Boats Commercial Limited Warranty

Coverage Type                                              Coverage Period                 Transferable

  Base Limited Warranty                                6 months                             no

  Tower Structural Limited Warranty             6 months                             no

  Tower Cosmetic Limited Warranty              3 months                             no

  Gelcoat Limited Warranty                            3 months                             no

  Hull Limited Warranty                                 5 years                                no

W-9

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Malibu Kayaks X-Factor Reinforcement Installation preview
X-Factor
Brand: Malibu Kayaks Pages: 3
buster BUSTER XXL Cabin 2011 Owner'S Manual preview
BUSTER XXL Cabin 2011
Brand: buster Pages: 304
Yamarin Cross 75 Owner'S Manual preview
75
Brand: Yamarin Cross Pages: 121
Aquabotix Technology Corporation ENDURA Series Manual preview
ENDURA Series
Brand: Aquabotix Technology Corporation Pages: 27
X-TREME scooter X-Fish 151 User Manual preview
X-Fish 151
Brand: X-TREME scooter Pages: 30
SKEETA FOILING CRAFT Nikki 5.5 Rigging Manual preview
Nikki 5.5
Brand: SKEETA FOILING CRAFT Pages: 32
SKEETA FOILING CRAFT NIKKI Rigging Manual preview
NIKKI
Brand: SKEETA FOILING CRAFT Pages: 32
CORRECT CRAFT 2008 2008 70141 Owner'S Manual preview
2008 2008 70141
Brand: CORRECT CRAFT Pages: 188
Defender 380 Operation, Maintenance & Warranty Manual preview
380
Brand: Defender Pages: 16
YAMARIN 58 Bow Rider Owner'S Manual preview
58 Bow Rider
Brand: YAMARIN Pages: 36
Malibukayaks Stealth-14 Owner'S Manual preview
Stealth-14
Brand: Malibukayaks Pages: 27
Zodiac CADET 200 Roll Up Manual preview
CADET 200 Roll Up
Brand: Zodiac Pages: 12
Yamaha VX Sport Owner'S Manual preview
VX Sport
Brand: Yamaha Pages: 106
Yamaha GP1300R WaveRunner 2006 Owner'S/Operator'S Manual preview
GP1300R WaveRunner 2006
Brand: Yamaha Pages: 126
Yamaha FX140 Service Manual preview
FX140
Brand: Yamaha Pages: 868
Otter Outdoors Stealth 1200 Owner'S Manual preview
Stealth 1200
Brand: Otter Outdoors Pages: 9
Williams sportjet Owner'S Handbook Manual preview
sportjet
Brand: Williams Pages: 134
Topaz Uno Plus Rigging Instructions preview
Uno Plus
Brand: Topaz Pages: 12

Brands by name

Popular brands

Load more brands