manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

2.  Promptly schedule an appointment with and deliver your boat to Malibu Boats or an

authorized Malibu Boats service facility for repairs. Warranty service must be
performed by Malibu Boats or an authorized Malibu Boats dealer. While not required,
it is preferable that you deliver your boat to your selling sales and service facility. 
If you need assistance locating an authorized Malibu Boats service facility, please
visit Malibu Boats website at www.malibuboats.com or call Malibu Boats at 
(865) 458-7110.  

Please note that Malibu Boats authorized repair facilities, generally, are independently
owned and operated businesses. Malibu Boats does not control the scheduling of service
work. However, if you encounter any material delays in obtaining service at one of
Malibu Boats authorized service facilities, please call Malibu Boats for assistance at
(865) 458-7110.

  Important Additional Things to Know about the 
  Malibu Boats Limited Warranty

In addition to the warranty terms and exclusions noted above, below you will find some
additional important things to know about the Malibu Boats Limited Warranty:  

Boat Operation, Care and Maintenance  

To ensure that you receive the maximum benefit from your purchase and this limited
warranty, Malibu Boats strongly recommends that you follow all of the instructions in the
boat’s operating manuals, including if applicable, any accompanying maintenance or
service schedules. Because questions may sometimes arise relating to the cause of a
particular failure, Malibu Boats strongly recommends that you keep detailed records of
any maintenance or service performed on your boat so that you may be able to assist, if
necessary, in the determination of whether a failure is covered under this Limited
Warranty. Damages to your boat caused by improper operation, care and maintenance are
not covered by the Malibu Boats Limited Warranty.  

Malibu offers gray boat covers for which the Limited Warranty is administered by their
manufacturer. No other color is offered by Malibu, and if another color is used, the cover
and upholstery warranty will be voided.

Pre-Delivery Service  

Defects and/or damage to the finish surfaces, trim, upholstery or other observable
cosmetic components of your boat may occur at the factory. These items are usually
detected and corrected at the factory or by the selling dealer prior to delivery to the retail
customer. You are encouraged to inspect your boat for this type of damage when you take
delivery. If you find any such defects or damage you must notify the selling Malibu Boats
dealer at the time of delivery to have these items covered by this limited warranty and to
have work performed on the items at no cost to you.  

W-7

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Lagoon 380 Owner'S Manual preview
380
Brand: Lagoon Pages: 114
J/Boats J/111 Owner'S Manual preview
J/111
Brand: J/Boats Pages: 65
Outcast OSG Commander Owner'S Manual preview
OSG Commander
Brand: Outcast Pages: 6
Boston Whaler 320 Outrage Owner'S Manual preview
320 Outrage
Brand: Boston Whaler Pages: 53
Yamaha AR240 HO Owner'S Manual preview
AR240 HO
Brand: Yamaha Pages: 134
Yamaha WaveRunner VX 2018 Owner'S/Operator'S Manual preview
WaveRunner VX 2018
Brand: Yamaha Pages: 108
Yamaha XL700 WaveRunner 2001 Supplementary Service Manual preview
XL700 WaveRunner 2001
Brand: Yamaha Pages: 122
NorthStar 120RF Manual preview
120RF
Brand: NorthStar Pages: 40
Robalo R160 2019 Owner'S Manual preview
R160 2019
Brand: Robalo Pages: 90
Robalo 2008 Center Console Owner'S And Operator'S Manual preview
2008 Center Console
Brand: Robalo Pages: 106
Robalo 2012 220 Owner'S/Operator'S Manual preview
2012 220
Brand: Robalo Pages: 143
Islander Yachts Islander 28 Owner'S Manual preview
Islander 28
Brand: Islander Yachts Pages: 17
Bestway 61103 Manual preview
61103
Brand: Bestway Pages: 5
Bestway 61108 Manual preview
61108
Brand: Bestway Pages: 28
Bestway 65052 HYDRO-FORCE KAYAKS VENTURA Manual preview
65052 HYDRO-FORCE KAYAKS VENTURA
Brand: Bestway Pages: 32
Bestway 61050 Manual preview
61050
Brand: Bestway Pages: 56
Boston Whaler 330 outrage User Manual preview
330 outrage
Brand: Boston Whaler Pages: 154
Boston Whaler 370 Outrage Owner'S Manual preview
370 Outrage
Brand: Boston Whaler Pages: 204

Brands by name

Popular brands

Load more brands