manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

2-10

Button Modes

SURF GATE CENTER GREEN indicates that both

gates are in the retracted position.

LEFT yellow indicates that the right gate will extend

when the boat is above 7 mph and below 13.6 mph.

LEFT green indicates that the right gate has extended

fully for surfing on the left side of the boat.

RIGHT yellow indicates that the left gate will extend

when the boat is above 7 mph and below 13.6 mph.

RIGHT green indicates that the right gate has

extended fully for surfing on the right side of the boat.

Alert banner that a left or right surf button has been

pressed.
Caution banner for over speed with a Surf Gate out.

The gate will automatically retract until speed has

returned below 13.6 mph.
Error with Left RAM

Error with Left RAM

Error with Right RAM

Error with Right RAM

Surf Service

Surf Service will enable both gates to fully deploy. This feature can only be accessed
while the boat is not moving.

The Surf Service feature is recommended to be used when the swim platform needs to be
removed or added without the interference of Surf Gates.

EXIT

CAUTION

EXIT

HIGH SPEED

SURF GATE

EXCEEDING 15 MPH WHILE 

SURF GATE DEPLOYED

 Chapter 2_15.qxp_ Chapter 2 doc.qxd  6/30/14  3:06 PM  Page 10

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Grand G480EF User Manual preview
G480EF
Brand: Grand Pages: 17
Sea Ray 290 Sun Sport Owner'S Manual preview
290 Sun Sport
Brand: Sea Ray Pages: 62
YAMARIN 42 Side Console User Manual preview
42 Side Console
Brand: YAMARIN Pages: 38
NW Explorations Arctic Star Operating Manual preview
Arctic Star
Brand: NW Explorations Pages: 63
Bavaria CRUSER 51 KONDOR 2018 Manual preview
CRUSER 51 KONDOR 2018
Brand: Bavaria Pages: 30
World Cat 2010 230SF Owner'S Manual preview
2010 230SF
Brand: World Cat Pages: 50
World Cat 2003 270 TE Owner'S Manual preview
2003 270 TE
Brand: World Cat Pages: 50
Pelican IPVUEKR12 Manual preview
IPVUEKR12
Brand: Pelican Pages: 2
Rona ROWonAIR AIRKAYAK 16' Quick Start Manual preview
ROWonAIR AIRKAYAK 16'
Brand: Rona Pages: 2
Galaxy PILOT P4.5 User Manual preview
PILOT P4.5
Brand: Galaxy Pages: 24
Lagoon Seventy 7 Technical Handbook preview
Seventy 7
Brand: Lagoon Pages: 80
Nauticstar Offshore Series Owner'S Manual preview
Offshore Series
Brand: Nauticstar Pages: 84
WaterQuest 14' Square Stern Owner'S Manual preview
14' Square Stern
Brand: WaterQuest Pages: 8
Yamaha AR195 Owner'S/Operator'S Manual preview
AR195
Brand: Yamaha Pages: 144
Sun Dolphin Dinghy Sportyak Owner'S Manual preview
Dinghy Sportyak
Brand: Sun Dolphin Pages: 8
Sun Dolphin Mackinawl Mackinaw ss User Manual preview
Mackinawl Mackinaw ss
Brand: Sun Dolphin Pages: 8
Sun Dolphin Sundolphin ASL Owner'S Manual preview
Sundolphin ASL
Brand: Sun Dolphin Pages: 12
eddyline Carbolite 2000 Owner'S Manual preview
Carbolite 2000
Brand: eddyline Pages: 20

Brands by name

Popular brands

Load more brands