manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

2-58

Malibu offers gray boat covers for which the Limited Warranty is administered by their
manufacturer. No other color is offered by Malibu, and if another color is used, the cover and
upholstery warranty will be voided.

Damage caused to your boat as a result of improper cover
use is not covered under your Malibu Boats warranty.
Damage can result from wind whipping, and possibly cause
abrasions to your gelcoat surface or upholstery. Use the
proper shipping cover for travel purposes. Usage of any color
boat cover other than the factory gray will void the upholstery
warranty.

Warranty coverage for your boat’s cover, canvas or bimini is
not included in the Malibu boat warranty. For warranty
assistance for these items, contact the manufacturer directly.

Stereo (N/A for Touch Screen)

To turn the stereo on, the ignition must be turned on. If equipped, 
the key can be turned to the left if you will not be running the boat.
Some systems, if equipped, will have an optional remote pad
located at the back of the boat either in the passenger area, or
exterior transom. For specific stereo use, please refer to the stereo
manual that was included in your owner’s packet. Standard on all
boats equipped with stereo system is an MP3 input line. See
instructions found in your owner’s packet for specific use.

If your boat was equipped with optional sound equipment to
include amplifier or subwoofer, please refer to these specific
manuals included in the owners’ packet for use.

Figure 2-46. Stereo 

Figure 2-47. Optional

Transom Remote

 Chapter 2_15.qxp_ Chapter 2 doc.qxd  6/30/14  3:06 PM  Page 58

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Advanced Elements AE1031 Owner'S Manual preview
AE1031
Brand: Advanced Elements Pages: 20
Bennett Musto Performance Skiff Rigging Manual preview
Musto Performance Skiff
Brand: Bennett Pages: 19
Sail Classics Herreshoff S-Boat Instructions preview
Herreshoff S-Boat
Brand: Sail Classics Pages: 2
TALAMEX Funline 200 Owner'S Manual preview
Funline 200
Brand: TALAMEX Pages: 55
YAMARIN 50 Bow Rider 2022 Owner'S Manual preview
50 Bow Rider 2022
Brand: YAMARIN Pages: 94
Four winns HORIZON Owner'S Manual preview
HORIZON
Brand: Four winns Pages: 131
Sea-doo Challenger 5896 Shop Manual preview
Challenger 5896
Brand: Sea-doo Pages: 274
Worx WR 534 Quick Start Manual preview
WR 534
Brand: Worx Pages: 2
Laser Performance Pico Rigging Manual preview
Pico
Brand: Laser Performance Pages: 18
LaserPerformance Zuma Rigging Manual preview
Zuma
Brand: LaserPerformance Pages: 5
Crivit M7-990053 Instructions For Use Manual preview
M7-990053
Brand: Crivit Pages: 43
Sabre Sabre 30 Owner'S Manual preview
Sabre 30
Brand: Sabre Pages: 81
Walker Bay 310R Assembly Instruction Manual preview
310R
Brand: Walker Bay Pages: 8
Yamaha WaveRunner XL800 Owners/Operaators Manual preview
WaveRunner XL800
Brand: Yamaha Pages: 126
Malibu Boats Wakesetter 20VTX 2019 Owner'S Manual preview
Wakesetter 20VTX 2019
Brand: Malibu Boats Pages: 238
Yamaha WaveRunner FX SVHO 2017 Operator'S Manual preview
WaveRunner FX SVHO 2017
Brand: Yamaha Pages: 118
YAMARIN 63 Hard Top Owner'S Manual preview
63 Hard Top
Brand: YAMARIN Pages: 47
YAMARIN 67 Day Cruiser Owner'S Manual preview
67 Day Cruiser
Brand: YAMARIN Pages: 104

Brands by name

Popular brands

Load more brands