manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

2-36

Malibu Setup Outputs Screens

The setup screen is used to keep the software up to date and adjust and troubleshoot the
Touch Command/MaliView system. Use the UP and DOWN buttons to highlight the
setup mode desired. Press ENTER button to access the mode highlighted. 

Pressing the ENTER button will activate the SETUP OUTPUTS mode. Turning on and
off ballast will change the appearance of the MLS screen. If the heater is removed the
heater button will indicate AUX. This will allow what was the heater button to be used.
The heater output on the Primary power module can be used with the new AUX button. 

 Chapter 2_15.qxp_ Chapter 2 doc.qxd  6/30/14  3:06 PM  Page 36

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Kadey-Krogen Yachts 5814 Owner'S Manual preview
5814
Brand: Kadey-Krogen Yachts Pages: 449
Walker Bay 275 RID Assembly Instructions Manual preview
275 RID
Brand: Walker Bay Pages: 8
Outsunny A33-027V01 Owner'S Manual preview
A33-027V01
Brand: Outsunny Pages: 22
Pro-Line Boats 27 Walkaround Owner'S Manual preview
27 Walkaround
Brand: Pro-Line Boats Pages: 33
Advanced Elements AIRFUSION EVO AE1042 Owner'S Manual preview
AIRFUSION EVO AE1042
Brand: Advanced Elements Pages: 50
Nacra 500 MK2 Assembly Manual preview
500 MK2
Brand: Nacra Pages: 112
Boston Whaler 110 Sport Owner'S Manual preview
110 Sport
Brand: Boston Whaler Pages: 80
Aquaglide BLACKFOOT ANGLER 11'0 Owner'S Manual preview
BLACKFOOT ANGLER 11'0
Brand: Aquaglide Pages: 28
Scout Boats 245 XSF Owner'S Manual preview
245 XSF
Brand: Scout Boats Pages: 112
Sea-doo Challenger 5896 Shop Manual preview
Challenger 5896
Brand: Sea-doo Pages: 274
Boston Whaler 255 Conquest User Manual preview
255 Conquest
Brand: Boston Whaler Pages: 106
Stiga 75-1160-19 Assembly & Instruction Manual preview
75-1160-19
Brand: Stiga Pages: 12
Bavaria VIRTESS 420 Owner'S Manual preview
VIRTESS 420
Brand: Bavaria Pages: 90
Baja Outlaw 33 Owner'S Manual preview
Outlaw 33
Brand: Baja Pages: 86
Hunter H15 Operator'S Manual preview
H15
Brand: Hunter Pages: 90
Hunter 27 the EDGE Operator'S Manual preview
27 the EDGE
Brand: Hunter Pages: 91
Pelican KI14 Manual preview
KI14
Brand: Pelican Pages: 3
XCS Excess15 User Manual preview
Excess15
Brand: XCS Pages: 124

Brands by name

Popular brands

Load more brands