manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

3-6

  Fueling

It is very important to take special precautions to avoid spillage while fueling your boat.
Gasoline vapors are heavier than air and will develop in the lower cavities of the boat,
such as the bilge.

Do not allow the fuel tank to empty completely during
operation. Doing so may damage the fuel pump. Damage from
running fuel systems empty is not be covered under standard
warranty.

Below is a list of guidelines you should follow when fueling your boat:

1)

   Extinguish all cigarettes and other flame or spark producing items.

2)

   Make sure all power is off, and do not operate any electrical switches.

3)

   Be sure to wipe off any

spillage that may have
occurred.

4)

   Operate the bilge blower

for a minimum of four
minutes before starting
the engine.

                                                                   Figure 3-5. Fueling

Do not overfill fuel tank. The fuel tank will expand and

contract based on weather conditions, and can cause fuel to
spill out the fuel exhaust vent. Damaged caused to your boat
from leaking fuel due to overfilling is not covered by your
warranty.

KC-0027C-A

!

CAUTION

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

PURSUIT 2270 CENTER CONSOLE Owner'S Manual preview
2270 CENTER CONSOLE
Brand: PURSUIT Pages: 104
Jeanneau SUN FAST 32i Manual preview
SUN FAST 32i
Brand: Jeanneau Pages: 95
ItsImagical 78761 Manual preview
78761
Brand: ItsImagical Pages: 18
Supra COMP ts6m 1989 Owner'S Manual preview
COMP ts6m 1989
Brand: Supra Pages: 89
Nauticstar 193 SC Owner'S Manual preview
193 SC
Brand: Nauticstar Pages: 86
Decathlon Tribord DINGHY 5S Owner'S Manual preview
Tribord DINGHY 5S
Brand: Decathlon Pages: 36
Access Dinghy Sailing 303 Single Seater Owner'S Manual preview
303 Single Seater
Brand: Access Dinghy Sailing Pages: 12
Baja Islander 242 Owner'S Manual preview
Islander 242
Brand: Baja Pages: 83
J/Boats J/92 S Owner'S Manual preview
J/92 S
Brand: J/Boats Pages: 27
World Cat 2005 230 SF Owner'S Manual preview
2005 230 SF
Brand: World Cat Pages: 52
World Cat 230CC Owner'S Manual preview
230CC
Brand: World Cat Pages: 62
World Cat 280CC-X Owner'S Manual preview
280CC-X
Brand: World Cat Pages: 66
World Cat 2006 320EC Owner'S Manual preview
2006 320EC
Brand: World Cat Pages: 57
World Cat 2006 250 DC Owner'S Manual preview
2006 250 DC
Brand: World Cat Pages: 58
World Cat 230DC 2022 Owner'S Manual preview
230DC 2022
Brand: World Cat Pages: 70
World Cat 255 DUAL CONSOLE 2015 Owner'S Manual preview
255 DUAL CONSOLE 2015
Brand: World Cat Pages: 92
Gnom Rov SuperPRO Operator'S Manual preview
SuperPRO
Brand: Gnom Rov Pages: 27
Ocean Kayak Trident 11 Owner'S Manual preview
Trident 11
Brand: Ocean Kayak Pages: 7

Brands by name

Popular brands

Load more brands