manualshive.com logo in svg

Malibu Boats 2 MXZ, User Manual

The Malibu Boats 2 MXZ offers exceptional performance on the water, and to ensure you make the most of your boating experience, we provide a comprehensive and user-friendly User Manual that you can download for free. Access the manual directly from manualshive.com, empowering you to maximize your time on the water without any hassle.

Share
Download
background image

2-47

  Engine Compartment Fire Extinguisher

Your boat is equipped with a Fireboy

®

Fire Extinguishing System. The extinguisher is

mounted in the engine compartment.

The fire extinguishing system is activated when the key is turned to the ON position. An
indicator light mounted next to the emergency safety lanyard will illuminate green,
indicating the fire extinguishing system is activated.

Do not start the engine if the indicator light does not
illuminate green when the key is in the ON position. See your
dealership immediately to locate the problem.

The extinguisher is equipped with a pressure gauge indicating
the level of charge. Inspect the pressure gauge daily before
starting the engine.

If the gauge indicates RECHARGE, service the fire
extinguishing system before operating the boat.

Do not operate the boat if the fire
extinguishing system requires service.
See your dealership immediately to
service the system.

The fire extinguishing system will automatically actuate when the sensor on the
extinguisher detects the temperature in the engine compartment reaches 175°F.

W

h e n  a c t u a t i o n  o c c u r s :

•    Immediately shut down the engine, powered ventilation and electrical systems.
•    Extinguish all smoking materials.
•    Do not open the engine compartment.

!

WARNING

!

WARNING

F i g u r e   2 - 2 1.  

F i g u r e   2 - 2 2 .  

F i g u r e   2 - 2 3 .  

 Chapter 2_15.qxp_ Chapter 2 doc.qxd  6/30/14  3:06 PM  Page 47

Summary of Contents for 2 MXZ















































































































































































































Reviews:

No comments

Related manuals for 2 MXZ

Chaparral 2009 Signature 250 Owner'S/Operator'S Manual preview
2009 Signature 250
Brand: Chaparral Pages: 148
komodo KDKX1INFKYA User Manual preview
KDKX1INFKYA
Brand: komodo Pages: 12
NW Explorations Grey Lady Operating Manual preview
Grey Lady
Brand: NW Explorations Pages: 40
NW Explorations Aquila Operating Manual preview
Aquila
Brand: NW Explorations Pages: 65
Kingfisher 2525 Ownersmanual preview
2525
Brand: Kingfisher Pages: 69
SKEETA FOILING CRAFT SKEETA 8.5 Rigging Manual preview
SKEETA 8.5
Brand: SKEETA FOILING CRAFT Pages: 32
Everglades 230 DC 2012 Owner'S Manual preview
230 DC 2012
Brand: Everglades Pages: 128
3D Tender XPRO RIB Aluminium 420 Owner'S Manual preview
XPRO RIB Aluminium 420
Brand: 3D Tender Pages: 18
Gnom Rov SuperPRO Operator'S Manual preview
SuperPRO
Brand: Gnom Rov Pages: 27
Yamaha AR210 Owner'S Manual preview
AR210
Brand: Yamaha Pages: 117
Walker Bay Airis Sport Owners & Safety Manual preview
Airis Sport
Brand: Walker Bay Pages: 18
Jeanneau MERRY FISHER 705 Owner'S Manual preview
MERRY FISHER 705
Brand: Jeanneau Pages: 90
Banzai 2-IN-1 SLIDE & BOUNCE COMBO PARK Assembly Instructions Manual preview
2-IN-1 SLIDE & BOUNCE COMBO PARK
Brand: Banzai Pages: 8
Yamaha WaveRunner VX Sport 2014 Owner'S/Operator'S Manual preview
WaveRunner VX Sport 2014
Brand: Yamaha Pages: 98
J-80 Stellar J Quick Start Manual And Manual preview
Stellar J
Brand: J-80 Pages: 25
Sea-doo Aqua Mate SD75005 User Manual preview
Aqua Mate SD75005
Brand: Sea-doo Pages: 14
Innova Solar 410C User Manual preview
Solar 410C
Brand: Innova Pages: 4
Innova TWIST I User Manual preview
TWIST I
Brand: Innova Pages: 10

Brands by name

Popular brands

Load more brands