41
Object Mapper Measurements with Baseline
When the
Start the project
button is pressed, the
Start Profile
screen appears
Once
Start Profile
is pressed, the user returns to the ordinary
measurement screen. The additional
Baseline Crossing
icon will be active
on this screen.
When passing the baseline, select the menu option
BL Crossing
to place a
marker on the GPR profile. This marker will be used to connect the current
profile to the defined baseline.
Note:
The baseline can be created anywhere along the GPR profiles e.g. at the beginning, middle or end and the
baseline must cross through all the profiles. If starting the profile directly on the baseline, press
BL Crossing
immediately after pressing
Start
, in other words, before moving the antenna.
After pressing
BL Crossing
the
screen to the left is seen. Here the
current profile is defined, in terms of
distance from the baseline start point
and the direction of the profile in
relation to the baseline. See the
picture illustration below.
