27
Wheels Edit Options
Select
Wheel Name
to create a name for the new wheel.
Select
Forward or Reverse
depending on the direction of the
wheel during
the calibration process.
Measure a distance on the ground using a measuring wheel or tape. Enter
this distance after selecting
Distance for Calibration.
Tip:
For a higher level of accuracy
, m
easure a length over the surface where
the GPR is being used. A longer distance will average out any surface variations.
Select
Start Calibration
once the correct details are entered into the above
options and when the GPR is positioned over the beginning of the measured
length. Move the GPR towards the end of the measured length, when this
process is complete, select
Stop Calibration.