17
Charging the Easy Locator Pro Battery
With the use of the correct adaptor,
connect the supplied battery charger to
the battery pack.
The LED light on the charger indicates the
following:
Red = Charged < 80%
Yellow = Charged 80-100%
Green = Maintenance charging
When re-mounting the battery, gently attach the d-sub connector on front of the battery with the
d-sub on the mounting tower. Then pull the battery release pin and press down on the battery
until the release pin slots into place.
Tip:
Though recharging up to 80% of the full capacity is typically very fast, it is recommended
to keep the battery charging until it is fully charged to help extend the battery life.
Note:
The battery charger can be left on after the battery has been fully charged where it will
then automatically enter a maintenance-charging mode.
Charging time for the 8.7Ah batteries is approximately 3-5 hours (80%-100%).
The temperature when charging should be within Zero to +45
o
C / 32 to 110
o
F. Do not charge
the batteries in direct sunlight or when surrounding temperatures is below freezing point.
