34
As the antenna is moved forward, a
black line indicates the progressing
along the grid line
If a mistake is made during the
measurement or the line is not
completed, select
Stop
and then
Next
Line,
an option will appear to restart
the line.
When the line is completed, the
Easy
Locator Controller
will indicate the
completed line by changing the screen
ready for the next line.
Move the antenna over to the next grid
line and select
Next Line.
Repeat these steps until the X-axis is
completed.
Move the antenna to the start of the Y-
axis and continue the measurements
along the Y-axis until the grid is
completed. Next, select
Stop and
Process
to complete the initial
processing stage.
Once the processing is complete, the
Grid Project screen shows the plan
view and one cross sectional (side)
view in the X or Y-axis.
