24
Set the type of trigger to be used for initiating a measurement.
Three triggering options are available:
Wheel, Time, or Keyboard Triggering.
Note:
Changing the three different trigger options will change the
options listed below the
Acquisition Mode
icon
Note:
When measuring by time, make sure that the time interval is
appropriate.
Selecting the
Wheel type
icon can choose a selection of predefined wheels
from the drop down list.
Tip:
Additional wheels and individual calibration can be added to the list
by accessing the
Acquisition Parameters
menu
Note:
The precision of the encoder wheel is not infinite and depending
on several factors as; the measurement surface, the pressure applied
on the wheel and possible wear. If you are unsure of the encoder wheel
precision a re-calibration should be made
Point interval sets the distance between the measured points/traces in the
radargram.
