Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
7
705-MAT-0005 : 0.60 hrs.
AUTO TENSIONER - REPLACE
Auto tensioner to be check at 60000, 80000kms and it is recommended to
replace it at every 100000kms.
Nut/ Bolt description
Quantity Nos.
Spanner Size
Torque Value – Nm.
Auto tensioner mtg. bolt
01
12 mm.
35 ± 05
Removal Steps –
1.
Remove NVH cover.
2.
Remove fan & shroud
3.
Remove power steering belt
(705-
MAT-0029)
& Accessory
drive belt
(705-MAT-0007)
4.
Remove Auto tensioner assy.
Assembly Procedure –
1.
Refit Auto tensioner assy.
2.
Refit Accessory drive belt
(705-
MAT-0007)
& power steering belt
(705-MAT-0029)
3.
Refit fan & shroud.
4.
Refit NVH cover.
NOTE
: Auto tensioner is provided with dowel-pin on its mounting face for correct fitment;
while assembling the dowel should match & fixed carefully.
Refer sketch
[D]
Dowel Pin location shown by arrow mark.
DRIVE BELTS - LAYOUT
B
A
C
Auto Tensioner
D
Auto Tensioner dowel
Pin mounting hole
