Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
46
•
Lights, Horns, Wipers & Washers to be inspected at 5000kms,
10000kms, and then every 10000kms.
Lighting Control – Turn Indication
When the lever is pushed down to position
C
it causes the turn signals on the right side of the
vehicle to blink. When the lever is pulled upward to position
A
it causes the turn signals on the
left side of the vehicle to blink. As the turn is completed, the lever will automatically return to
the center position and turn
OFF
the signals at the same time.
Parking Lights –
Turn the knob upward to first position switches ON the parking and side light
of the vehicle exterior lighting system.
Headlamp High beam –
With the headlamp dipped beam ON, pushing stack downward
switches ON the headlamp high beam.
Headlamp ON dipped beam –
Turn the knob upward to second position switches ON the
headlamp dipped beam.
Hazard warning indicator –
Press the switch (located on the instrument panel) to activate all
turn-indications simultaneously.
NOTE:
the direction indicators do not work when the hazard warning is activated.
