Maintenance Manual
MAN-00
135
GENIO DC
(BS-III & BS-IV)
JULY 2011
/Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2011 Mahindra & Mahindra Ltd.
21
Remove bundy tube connected on wheel
cylinder.
Ensure and avoid brake fluid leakages.
Remove Back plate assy.
Ensure proper storage of brake liners and avoid
damages.
Remove the axle shaft from rear axle shaft tube.
Use
MST 0505AAA0001ST
.
Place the special tool flange over axle studs;
tighten with minimum 2 mounting bolts. Push the
handle to outside direction so that axle shaft
assembly will come out of the tube.
Open and remove the lock clip by using flat
screw driver.
Remove the lock nut by using
MST 621
.
Ensure that while removal, assembly should be
fixed on bench voice to avoid slippages. The
locking nut is fitted with locktite; it require high
amount of force to remove.
