Section 3. Standalone Operation
21
F1=FS
means press
F1
to insert a Field Separator. There are three in the above
example. The
Ins
key is located in the top row of the keyboard next to the
Delete
key (at
the extreme right). When the
Ins
key is pressed, the display toggles between
Ins
(Insert)
and
Ovr
(Overstrike)
.
This key permits a character to be inserted or overstruck with
another character.
Enter=done
means press
Enter
when the change to the track is
complete. If anything else is pressed such as
Esc
, the change will not occur.
2
.
To change
^
JKL
^
in the
example above to
^MNOP^
, press the
Ins
key until
Ovr
is
showing on the LCD. Position the cursor over the
J
. Type
MNO
. Press the
Ins
key until
Ins
shows on the LCD and type
P
. The result is
MNO
replaced
JKL
and the
P
has been
added in the field. Press
Enter
to return to the Free Format display.
Select an operation
Esc=exit
Tk:1* 2* 3*
E)ncode card
C)lear tracks
3.
If only one or two tracks are to be encoded, press
C
to clear tracks:
Select tracks to clear
Enter=done
Track: 1=no
2=no
3=no
A)ll
N)one
The selections of numbers and letters act as toggle switches. In this example tracks will
clear separately by pressing
1
,
2
, or
3
. Pressing
A
will clear all tracks. No tracks will be
cleared if
N
is pressed. Press
A
and the following appears:
Select tracks to clear
Enter=done
Track: 1=YES 2=YES 3=YES
A)ll
N)one
4. Press
Enter
and the following appears:
Press ‘C’ to clear tracks 1 2 3
or any other key to cancel
Press
C
to complete the clear tracks operation.
5. When
Select an operation
, press
E
and if there is no data in the buffer, the
display will be:
Select an operation
Esc=exit
No data to encode.
Summary of Contents for MT-95
