MT-95 RS-232 HiCo/LoCo Encoder/Reader
24
This may be a HiCo card. Try again
--> Slide card right when ready -->
Swipe as required.
6.
Remove the card, and encode other cards in the same manner.
Create Format Card
From the main menu press
E)ncode
, then
2)Fixed Format
or Press Esc until the following
menu reappears:
Select an operation
Esc=exit
E)ncode cards
C)reate Format card
To create a format card (as the one used above), proceed as follows:
1. Press
C
to create a Format Card, and the following appears:
Select an operation
Esc=exit
Tk:1* 2
3
E)ncode card
C)lear tracks
2.
The asterisks in the above menu indicate that there is data in Track 1. To remove the
data, press
C
and the following appears:
Select tracks to clear
Enter=done
Track: 1=no
2=no
3=no
A)ll
N)one
The selections of numbers and letters toggle
Yes
and
no
. In this example tracks may be
cleared separately by pressing
1
,
2
, or
3
. Pressing
A
will clear all tracks. No tracks will
be cleared if
N
is pressed. Press
A
and the following appears:
Select tracks to clear
Enter=done
Track: 1=YES 2=YES 3=YES
A)ll
N)one
3. Press
Enter
for the following display:
Press ‘C’ to clear tracks 1 2 3
or any other key to cancel
The purpose of this display is to reaffirm clearance of the correct tracks.
Summary of Contents for MT-95
