Section 3. Standalone Operation
23
2. Press
E
, and the display will be:
Please swipe a Format Card
or press Esc to exit
Read a previously encoded Format Card and remove it. The following display appears:
Ready for data entry...
Remove the card
When the card is removed, the following appears:
Enter track:1 Pos:007
Esc=exit
%A12345---^SARAH SMITH^1234567890?
Track 1 is ready for encoding, and Position 7 is where the first variable character will be
encoded. The cursor will remain on Position 7 until a character is typed.
3. Type
678
to fill in all variable locations. When all locations on all tracks have been
filled, the following display will appear on the first line:
Insert card to encode
Enter=review
To verify the data that has been entered, press
Enter
and the following appears:
Insert card to encode
Enter=review
1)%A12345678^SARAH SMITH^1234567890?
The
1)
indicates that on Track 1
678
have been added.
4.
Insert a card to encode on the left side, and the following will appear:
Encoding data on track
1
->Slide card right when ready ->
5.
Swipe the card and if encoding is successful, the following will appear:
*** CARD ENCODED CORRECTLY ***
Remove the card
or if the card is HiCo:
Summary of Contents for MT-95
