Magtek MT-95, Installation And Operation Manual

Page: 10 / 54

MT-95 RS-232 HiCo/LoCo Encoder/Reader
2
•
Supports HiCo or LoCo in one unit
•
Easy to operate with operator prompts, preprogrammed repetitive data, display screens that
instruct the operator on encoding sequence
•
Any existing 4777-3 can be replaced with the MT-95 HiCo Card Encoder
•
Existing applications that encode LoCo cards on the 4777 can use the MT-95 in Auto mode
to encode HiCo or LoCo cards
•
Easy-to-understand prompts at each step of the read and encode operation with operator-
friendly 80-character messages with an idle prompt that can be customized
•
With Mag-Tek cable (P/N 21015846), operates seamlessly with IBM 4778 PIN-Pad - no
retrofits required
•
Easy installation - after power is applied, the unit operates without any changes to the PC
software - no drivers to install, no configurations to modify, no new software to learn
REQUIREMENTS
The requirements listed below are for the three versions of the MT-95.
Standard Mode
•
Model MT-95 RS-232 HiCo/LoCo Encoder/Reader P/N 31010019
•
Mag-Tek Keyboard, P/N 93600047, or equivalent AT style keyboard (optional)
•
PC or Terminal with software to operate the serial port for sending and receiving data
(Mag-Tek offers the MT-80 software program P/N 15030402, manual P/N 99815005.)
•
PC Cable for DE9P Male Connector P/N 21015823; or PC Cable for DB25P Male Connector
P/N 21015821 (must be ordered separately)
•
Power Cord P/N 71100001 (included)
IntelliCoder
•
Model IntelliCoder, RS-232, HiCo Encoder/Reader, P/N 31010021
•
Cable, P/N 21015847 (9-pin to 9-pin) (included)
•
Power Cord, P/N 71100001 (included)
4777 Emulation Mode
•
Model MT-95 RS-232 HiCo/LoCo Encoder/Reader P/N 31010020
•
Cable P/N 21015846 (MT-95 to IBM 4778 PIN-Pad) (included)
•
Power Cord , P/N 71100001 (included)