67
MPB-311
Mounting
Setting the position "blocked" (home position)
1. Set the bicycle door to the "blocked" position.
√
The switching cam must be precisely in front of the proximity sensor in this
position.
If there is a clear offset between the switching cam and the proximity sensor, you
need to adjust the cam plate as follows:
1. Loosen the hexagon socket screw on the drive shaft using a size 4 wrench.
2. Turn the cam plate so that it is exactly in front of the proximity switch.
3. Tighten the hexagon socket screw.
3
1
2
1
3
4
1
Mag01
284
Fig. 40:
Setting the home position
1 Cam plate
2 Proximity sensor
3
Drive shaft
4
Hexagon socket screw size 4
Summary of Contents for MPB-311
Page 115: ...115 MPB 311 MPB 311...
