50
MPB-311
Mounting
6. We recommend covering the inserted loop using quartz sand. Make sure that at
least 25 mm remain between the upper edge of the carriageway and the quartz
sand for the potting compound.
7. Seal the groove with the potting compound. The temperature resistance of the
loop must match the temperature of the potting compound.
8. Allow the potting compound to cure.
7.7.5
Installing induction loops under interlocking stone paving
Mag00641
2
3
4
1
150
3030
Fig. 21:
Installing an induction loop under interlocking stone paving (dimensions in mm)
1 Paving
2 Induction loop
3
Sand bed
4
Substructure
When installing induction loops under interlocking stone paving, following points
must be observed additionally:
›
Only use the pre-assembled loop from Magnetic type IS06.
›
Install the induction loop in sand only. The induction loop must not be installed in
gravel or split.
›
The induction loop must not slip or shift or be damaged during operation.
›
Keep a minimum clearance between paving and induction loop of approx. 30 mm.
Summary of Contents for MPB-311
Page 115: ...115 MPB 311 MPB 311...
