59
MPB-311
Mounting
IMPORTANT!
The locking discs must be installed again in the same positions later
in which you remove the locking discs. The tops are marked TOP. The
groove of locking disc 1 points in the direction of the locking unit.
5. Turn the drive flange until the first hold-down screw is visible.
6. Unscrew the first hold-down screw.
7. Remove the first locking disc.
8. Loosen and remove the first two centring bolts.
Top
Top
Top
Top
Top
Top
3
1
135°
3
2
Mag0128
6
Fig. 30:
Removing the hold-down screw, locking disc and centring bolt
1 Hold-down screw
2 Locking disc, here locking disc 2 without groove
3
Centring bolts
9. Turn the drive flange for another 180°.
10. Unscrew the second hold-down screw.
11. Disassemble the second locking disc.
12. Loosen and remove the two remaining centring bolts.
Summary of Contents for MPB-311
Page 115: ...115 MPB 311 MPB 311...
