108
MPB-311
Conversion
8. Place the washers on the threaded rod of the magnet as shown in the figure.
Place 3 washers between magnet and holder. Place 2 washers between notch
lever and union nut.
9. Screw the union nut onto the threaded rod.
10. Mount the magnet on the holder.
11. Tighten the union nut and secure with threadlocker such as Loctite 241.
M
ag00891a
2
1
Fig. 71:
Mount magnet, washers and union nut (locked when de-energised.)
1 3 washers between magnet and holder
2 2 washers between notch lever and union nut
12. Convert magnets on the other side, e.g. magnet RL1.
√
The locking unit has been modified for the "Locked when de-energised"
configuration.
M
ag00892a
Fig. 72:
Locking unit configuration "locked when de-energised"
13. Parameterise the turnstile for the "locked when de-energised" configuration in
the "Gate HW" menu on the MGC control unit.
Summary of Contents for MPB-311
Page 115: ...115 MPB 311 MPB 311...
