Magnetic Autocontrol MHTM MicroDrive, Operating Instructions Manual

Page: 149 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
5815,5001US / Version 02.66 149
Delete remote control
1. The operating view is displayed.

See page 106, Fig. 44.
2. Press right operating button .
3. The "Main menu" menu is displayed.
4. Select the menu "Radio control FM" with the two middle
buttons , .
5. Confirm selection with the right control button .
6. Select the parameter "delete remote control" with the two
middle buttons , .
7. Confirm selection with the right control button .
8. The options "With remote control" and "With number" are
displayed.
9. Select an option with the two middle buttons , .
10. Confirm selection with the right control button .
Option "with remote control" The option "With remote control" was selected
1. The message "press button" appears.
2. Press the button on the hand transmitter.
3. The message "Successful" appears. The number for the
parameter "Number transmitter" is decreased by one.
4. Press the left button repeatedly until the operating view is
displayed again.
Option "with number" The option "With number" was selected
1. Enter hand transmitter number.
2. Use the left button
to leave the menu.
3. The safety prompt "Save changes?" appears.
 If the hand transmitter is to be deleted, press the right
button .

If the hand transmitter is to be deleted, press the left button
.
4. The "Delete remote control" menu is displayed.
5. Press the left button
repeatedly until the operating view is
displayed again.