Barrier MHTM
TM
MicroDrive
Repair
174
5815,5001US / Version 02.66
14.3.2
Barrier arm type "MicroBoom-T"
1. Secure barrier danger area e.g. with barrier tape.
2. Remove the barrier housing hood.
3. Remove the barrier housing door.
WARNING!
Danger of crushing between barrier arm and barrier housing!
4. Switch off power supply. Ensure that the system is powered
down. Secure against reactivation.
5. The barrier must be open. Open barrier arm manually if
required.
6. Remove barrier arm. For this, loosen the hexagon screw at
the flange.
Mag00266
Fig. 61: Remove barrier arm
7. Replacing the barrier arm.
8. Attach the new barrier arm to the flange using the hexagon
screw.
9. Push the barrier into the top-most position. The clamping lever
must be at the stop for the "open" position. If required, push
straight through the upper tool bore with a tool to press the
lever arm from the dead point.
See page 168, chapter 13.5.
10. Check the vertical alignment of the barrier arm with a spirit
level and correct with the hexagon socket screws at the flange
if necessary.
Summary of Contents for MHTM MicroDrive
