Magnetic Autocontrol MHTM MicroDrive, Operating Instructions Manual

Page: 123 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
5815,5001US / Version 02.66 123
10.8 Menu "Information" ( )
Call and navigate
1. The operating view is displayed.

See page 106, Fig. 44.
2. Press left control button .
3. Use the left control button to scroll within the menu.
4. The "Information" menu is can be left as follows:
 Press the left control button repeatedly until the operating
view is displayed again or
 Press right control button control button.
Operating view

Information
Parameters Description
Error messages Shows the currently pending errors.
If no error messages are present, the menu is not displayed.
Inputs Displays the current settings for the digital inputs IN1 to IN8
Outputs Displays the current settings for the digital outputs DO1 to DO4 and the relay
outputs NO1 to NO3 and NO/NC4 to NO/NC6.
Induction loops
Detector (A-B),
Detector (C-D)
Displays the current frequencies of the connected induction loops.
The first plug-in module is displayed as "Detector (A-B)". The second plug-in module
is displayed as "Detector (C-D)". The frequencies of induction loops A and B are
displayed directly. To display the frequencies for the induction loops C and D, you
have to press the button . Use the button you can switch the view between
"Detector (A-B)" and "Detector (C-D)".

See page 143, chapter 10.15 "Menu detector 1 (A-B)".
Table 41: Menu "Information"
10.9 Program mode

See page 112, chapter 10.7.