Magnetic Autocontrol MHTM MicroDrive, Operating Instructions Manual

Page: 92 / 196

Barrier MHTM
TM
MicroDrive
Electrical connection
92 5815,5001US / Version 02.66
DANGER!
Mortal danger by electric voltage!
1. Disconnect barrier system power supply. Ensure that the
system is powered down. Secure against reactivation.
Strip-off cable and core insulation –
preparation of the wiring 2. Strip-off mains supply and cores according to the following
figure.
Mag00201
0.79
(20)
0.31
(8)
1.18
(30)
0.31
(8)
2
3
1
Fig. 38: Strip-off the mains supply
Dimensions in inch or feet are without parenthesis. Dimensions in
mm are in parenthesis
1 Phase
2 Neutral
conductor
3 Ground conductor
Mains supply placement 3. Connect mains supply to the provided terminal clamps
(X1: L/N/PE) of the barrier housing according to the following
figures.

See also page 181, chapter 18.1.
 Place mains supply properly in the barrier housing. The line
must be wired so that no damage could occur due to
moving parts.
 Attach mains supply to the metal tabs via 2 cable ties.
1
Fig. 39: Mains supply placement
1 Mains supply
2 Cable tie
3 Cable tie metal tabs