Magnetic Autocontrol MHTM MicroDrive, Operating Instructions Manual

Page: 73 / 196

Barrier MHTM
TM
MicroDrive
Assembly and installation
5815,5001US / Version 02.66 73
WARNING!
Danger of crushing between barrier arm and barrier housing!
4. Switch off power supply. Ensure that the system is powered
down. Secure against reactivation. The balancing springs in
the lever system are relaxed (boom raised).
5. Remove end cap from the barrier arm.
Mag00170
Fig. 25: Disassemble end cap
6. Slide a slot nut into the groove at the underside of the barrier
arm. Place a slot nut on the upper side of the barrier arm.
Mag00171
Fig. 26: Assemble slot nuts
7. Attach the flange with the 4 hexagon socket screw and the
two slot nuts to the barrier arm. The shorter protrusion of the
flange must point towards the barrier arm end.
 Use a torque wrench with hexagon socket: 5 AF
 Tightening torque: 11.801 lbf ft (16 Nm)
Mag00173
Fig. 27: Assembling flange