Magnescale MG10A-P1, Instruction Manual

Page: 83 / 132

(E)
35
MG10A-P1 / MG10A-P2
I/O area
Input format −P1: source input (+COM)/−P2: sink input
(−COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
Output format −P1: open collector output, sink type (−COM)
−P2: source type (+COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
Input signals Reset, start/latch, pause, RS trigger (valid
for all connected channels)
Output signals General alarms
Modules which can be connected (sold separately)
Counter module MG20A-DK, MG20A-DG, MG20A-DT
Diff erent models can be mixed and
connected together; max. 16 units
*
1
I/F module MG30-B1, MG30-B2
*
1
Other
Operating temperature 0 to
+
50 °C(no condensation)
and humidity range
Storage temperature −10 to
+
60 °C (20 to 90 % RH)
and humidity range
*1: The system cannot be confi gured in such a way that the total
power of the modules connected to the MG10A will exceed 54 W
when the supply voltage is 12 V or will exceed 108 W when it is
24 V.
Design and specifi cations are subject to change without notice.
8. Specifi cations
8-1. Electrical Specifi cations
Supply voltage DC 12 to 24 V (11 to 26.4 V)
Allowable power startup time: Max. 100 ms
Power consumption 2.0 W
+
total power of connected modules
*
1
Communication area
Communication RS-232C (compliant with EIA-232C
interface standard)
Baud rate setting 2400, 9600, 19200, 38400 bps
Data length 7 or 8 bits
Stop bit 1 or 2 bits
Parity None, odd, even
Delimiter “CR”, “CR” + “LF”
Flow control Hardware fl ow control (RTS, CTS)
Link function
No. of units linked Max. 16 units (total of 64 counter modules)
Cable length Max. 10 meters
between links