18
11. a) If you are using a UHF radio:
- Select the desired frequency channel (US) or enter the frequency (Europe
and other countries)
- Click the
Set Radio
button to configure the radio.
b) If you are using the integrated GSM modem and you have already defined
the GSM base parameters
on the rover configuration port tab:
- Check that the GSM status reading is “READY” and the GSM signal
strength is at a sufficient level (see figure 21)
- Click on the
Dial
button to call the base. After the connection to the base is
established, the GSM module status should read “ON LINE” (see figure 22).
Rover configuration is now complete. You may save your rover configuration as
described above in this manual. You can check the LEDs on the Z-Max front
panel to make sure the system is functioning correctly.
Figure 21- Rover GSM screen
Figure 22- Rover GSM connection screen
Summary of Contents for FAST Survey
Page 1: ...FAST Survey Getting Started Guide www thalesnavigation com THALES NAVIGATION...
Page 4: ...ii...
Page 35: ......