215953
28
Revision A
2.2.4
Installing Shield Assembly
The shield assembly attaches to the swath compressor frame.
1021935
A
Figure 2.30: Windrower Console Buttons
1.
Start the engine and raise the header legs.
2.
Press SWATH COMPRESSOR LOWER button (A) to fully
retract the swath compressor cylinder.
3.
Shut down the engine, and remove the key from
the ignition.
1022790
A
Figure 2.31: Lifting Swath Compressor Shield
4.
Position the forklift with the forks over the front of the
compressor shield, and attach lifting straps (A) through the
front and back of the shield frame. Lift the swath
compressor shield out of the shipping crate.
1022833
A
Figure 2.32: Compressor Shield under Windrower
5.
Approach the windrower from the front and move shield
(A) under the windrower. Lower the shield to the ground.
Remove the lifting straps and back the forklift clear of the
windrower.
