215953
27
Revision A
1021935
A
Figure 2.27: Windrower Console Switches
CAUTION
Ensure that all bystanders have cleared the area.
3.
Start the engine and press SWATH COMPRESSOR LOWER
switch (A) for five seconds to relieve pressure behind the
couplers.
4.
Shut down the engine, and remove the key from
the ignition.
1022819
A
B
C
D
Figure 2.28: M1170 Hose Connections
–
2017 and
Earlier
M1170 (2017 and earlier) hose connections
5.
Route the hoses under the filters and connect the hydraulic
couplers as follows:
•
Hose with male coupler to female connector (A)
•
Hose with (smaller) female coupler to male
connector (B)
•
Hose with (larger) female coupler to male connector (C)
6.
Position hose sheath (D) so the sheath contacts the fittings.
Secure the sheath at both ends with cable ties (MD #30753)
supplied in the manual bag.
1023530
A
B
C
D
Figure 2.29: M1 Series Hose Connections
—
2018
and Later
M1 Series (2018 and later) hose connections
7.
Connect the hydraulic couplers as follows:
•
Hose with male coupler to female connector (A)
•
Hose with (smaller) female coupler to male
connector (B)
•
Hose with (larger) female coupler to male connector (C)
8.
Position hose sheath (D) so the sheath contacts the coupler
fittings. Secure the sheath at both ends with cable ties
(MD #30753) supplied in the manual bag.