215953
24
Revision A
1023130
A
B
Figure 2.20: Sensor on Left Support
16. Ensure sensor arm (A) engages bolt (B) on the left rock
shaft lift support, and ensure it is not bent or damaged.
1023468
C
B
B
A
F
A
D
D
E
Figure 2.21: View from below Windrower
17. Tighten six bolts (A) attaching the supports directly to the
frame and torque to 39 Nm (29 lbf·ft).
18. Tighten two bolts (B) attaching the side supports to the
front support and torque to 39 Nm (29 lbf·ft).
19. Ensure front clamps (C) engage the windrower frame as
much as possible and torque four bolts (D) to 39 Nm (29
lbf·ft).
20. Ensure rear clamps (E) engage the windrower frame as
much as possible and torque two bolts (F) to 39 Nm
(29 lbf·ft).
