215953
38
Revision A
1014673
A
Figure 3.13: Calibration Screen
NOTE:
Pressing X icon (A) (or pressing the HOME, BACK or any GSL
button [buttons not shown]) at any time during the
calibration process will EXIT calibration without saving. The
engine speed will also return to the original rpm.
NOTE:
If a sensor goes out of its normal operating range during
the calibration process, calibration will stop and a message
will appear indicating that the sensor is out of range.
1014670
A
Figure 3.14: Calibration Screen
9.
When stage one of the calibration is complete, press PLAY
icon (A) to continue with stage two of the calibration
process.
1014672
A
Figure 3.15: Calibration Screen
10. When stage two of the calibration is complete, press
RESUME icon (A) to set HEADER FLOAT, or press HOME or
BACK button (not shown) to exit without setting the float.
NOTE:
The engine speed returns to the original rpm when stage
two calibration is complete.
