215953
79
Revision A
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. The completed checklist should be retained by
either the Operator or the Dealer.
CAUTION
Follow the instructions carefully. Pay attention to safety-related messages, and avoid unsafe practices.
ü
Item
Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque.
6.1 Torque Specifications, page 67
Raise and lower the swath compressor to check for
linkage binding. Rubber bumpers at the rear should
contact the windrower frame when fully raised. If
binding occurs, adjust by adding washers where the rear
supports are fastened to the outside of the frame.
2.2.1 Installing Frame, page 20
Ensure sensor arm does not bind when raising or
lowering the swath compressor.
2.2.1 Installing Frame, page 20
Ensure the fuel filter sensor wire does not contact the
swath compressor frame when fully raised.
2.2.1 Installing Frame, page 20
Check hydraulic hose routing for clearance when raising
or lowering the swath compressor. Adjust as necessary.
2.2.3 Connecting Hydraulics, page 26
Ensure hydraulic hoses are secured in place with
cable ties.
2.2.3 Connecting Hydraulics, page 26
Ensure the swath compressor lock is functioning
properly.
3.3.6 Locking and Unlocking Swath Compressor, page 44
Check for hydraulic leaks.
—
Ensure the side deflectors are set evenly to the desired
position.
3.3.5 Adjusting Side Deflectors, page 44
Ensure the latest software version is installed in the
windrower.
—
Date checked:
Checked by:
