214880
11
Revision A
1.9
Understanding Safety Signs
NOTE:
This is a general list of safety sign definitions and the decals listed may not necessarily be applicable to your machine.
Figure 1.18: MD #113482
MD #113482
General hazard pertaining to machine operation and servicing.
CAUTION
•
Read the operator
’
s manual, and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
•
Do
NOT
allow untrained persons to operate the machine.
•
Review safety instructions with all Operators annually.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of machine before starting
engine, and during operation.
•
Keep riders off the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage drive, put transmission in Neutral, and wait for all
movement to stop before leaving operator
’
s position.
•
Shut off engine and remove key from ignition before
servicing, adjusting, lubricating, cleaning, or unplugging
machine.
•
Engage locks to prevent lowering of self-propelled rotary
disc header before servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning lights
when operating on roadways unless prohibited by law.
Figure 1.19: MD #166832
MD #166832
Hydraulic pressure oil hazard
WARNING
•
High pressure oil easily punctures skin causing serious injury,
gangrene, or death.
•
If injured, seek emergency medical help.
•
Do
NOT
use finger or skin to check for leaks.
•
Lower load or relieve hydraulic pressure before loosening
fittings.
