214880
61
Revision A
Chapter 4:
Maintenance and Servicing
The following instructions provide information about routine servicing for the header. A parts catalog is located in a plastic
case on the fixed deflector on the left side of the header.
Log hours of operation and use the maintenance record provided (refer to
4.3.1 Maintenance Schedule/Record, page 64
) to
keep track of your scheduled maintenance.
4.1
Preparing Machine for Servicing
CAUTION
To avoid personal injury, perform the following procedures before servicing disc header or opening drive covers:
1.
Lower the header fully. If you need to perform service in the raised position, always engage safety props. For
instructions, refer to
3.3.1 Engaging and Disengaging Header Safety Props
2.
Put the ground speed lever (GSL) in PARK.
3.
Stop the engine and remove the key from the ignition.
4.
Wait for all moving parts to stop.
