214880
141
Revision A
Figure 4.163: Left Side of Conditioner
–
Right Side
Similar
10. Loosen two M16 hex head bolts (A) at each side of the
conditioner that secure it to the header.
Figure 4.164: Conditioner Gearbox
11. Loosen two M12 hex head bolts (A) securing conditioner
gearbox (B) to the header.
WARNING
To prevent the conditioner from falling backward, ensure lifting
chains are secure and tight. Failure to do so may result in death
or serious injury.
CAUTION
Stand clear when detaching conditioner as conditioner may
shift when bolts are removed.
12. Adjust the height of the forks to raise the conditioner
slightly. Remove the loosened bolts and retain hardware for
reinstallation.
Figure 4.165: Conditioner Lift
WARNING
Ensure spreader bar is secured to the forks so that it cannot
slide off the forks or towards the header. Failure to do so could
result in death or serious injury.
13. Using the forklift, lift conditioner (A) off header (B). Avoid
contact between the top of the conditioner and center-link
anchor (C).
NOTE:
Header supports removed from illustration for clarity.
14. Move the conditioner away from the work area, set it on
the ground, and remove the chains securing the conditioner
to the spreader bar.
