214880
140
Revision A
Figure 4.160: Header Support Deflector
–
Left Side
of Header
5.
Remove three M10 short square neck carriage head
bolts (A) securing the header support deflector (B) to the
header support, and remove the deflector.
6.
Repeat Steps
and
at the opposite
side of the header.
Figure 4.161: Spreader Bar
WARNING
To prevent straps from slipping off forks, ensure straps are
securely attached to forks. Failure to do so could result in death
or serious injury.
7.
Attach spreader bar (A) to a forklift (or equivalent lifting
device) and attach chains to lugs (B) on conditioner (C). Use
a chain rated for overhead lifting with a minimum working
load of 1135 kg (2500 lb.).
NOTE:
Header supports removed from illustration for clarity.
Figure 4.162: Conditioner Driveline
–
Left Side
of Header
8.
Release spring lock quick coupling yoke (C) of conditioner
driveline (B), and secure driveline to the conditioner
housing to keep it out of the way.
9.
If removing the conditioner driveline (B) from conditioner,
loosen M12 hex head bolt (A) securing driveline to the
conditioner. Remove M12 bolt (A), washer, and hex flange
center lock nut, and remove conditioner driveline.
