262175
38
Revision A
3.7
Installing Windshield Access Step
The windshield access step will need to be installed onto the railing of the windrower
’
s right cab-forward side platform.
1018596
A
B
Figure 3.39: Step in Shipping Position
1.
Remove windshield access step (A) from the shipping
location on the right platform. Remove packing
materials (B) from the step and the railing.
A
ϭϬϰϭϲϱϬ
Figure 3.40: (MD #136209)
2.
Retrieve three M10 screws (A) (MD #136209) from the
toolbox.
1016246
A
C
B
Figure 3.41: Windshield Access Step Installed
3.
Position step (A) on the right cab-forward leg at the
forward end of the platform as shown.
4.
Install two M10 screws (B) (MD #136209) through the top
of the step. Do
NOT
tighten the hardware yet.
5.
Install one M10 screw (C) (MD #136209) through the step
support.
6.
Tighten the screws to 57 Nm (43 lbf·ft).
