262175
111
Revision A
1000797
A
B
Figure 5.32: Header Stand
7.
Lower stand (A) by pulling clevis pin (B), inverting the stand
and relocating it on the bracket. Reinsert pin (B) and secure
it with the hairpin.
1015883
A
Figure 5.33: Center-Link
8.
Windrowers with self-aligning center-link:
Release center-
link latch (A).
1029799
A
Figure 5.34: Safety Prop Lever
9.
Disengage the safety props on both lift cylinders as follows:
a.
Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b.
Repeat the previous step for the opposite cylinder.
NOTE:
If the safety prop will
NOT
disengage, raise the header to
release the prop.
10. Start the engine.
