262175
133
Revision A
ϭϬϰϭϭϮϮ
A
B
C
D
Figure 5.78: Header Leg and Windrower Lift Linkage
Connected by Header Support
6.
Remove and retain hairpin (D) and clevis pin (C) from
header support (B) and windrower lift linkage (A). Repeat
this step at the opposite side of the windrower.
1015883
A
Figure 5.79: Center-Link
7.
Windrowers with self-aligning center-link:
Release center-
link latch (A).
1029799
A
Figure 5.80: Safety Prop Lever
8.
Disengage the safety props on both lift cylinders as follows:
a.
Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b.
Repeat the previous step for the opposite cylinder.
NOTE:
If the safety prop will
NOT
disengage, raise the header to
release the prop.
9.
Start the engine.